aboutsummaryrefslogtreecommitdiffstats
path: root/help/C/evolution-faq.sgml
diff options
context:
space:
mode:
Diffstat (limited to 'help/C/evolution-faq.sgml')
-rw-r--r--help/C/evolution-faq.sgml957
1 files changed, 0 insertions, 957 deletions
diff --git a/help/C/evolution-faq.sgml b/help/C/evolution-faq.sgml
deleted file mode 100644
index 80650fdbd3..0000000000
--- a/help/C/evolution-faq.sgml
+++ /dev/null
@@ -1,957 +0,0 @@
-<!--
-<!DOCTYPE appendix PUBLIC "-//GNOME//DTD DocBook PNG Variant V1.1//EN">
--->
-<appendix id="evolution-faq">
- <title>Frequently Asked Questions About Ximian Evolution</title>
- <para>
- Here are some frequently asked questions about the
- <application>Evolution</application> groupware suite from
- Ximian. If you have a question that's not listed, you can
- contact us at evolve@ximian.com.
- </para>
-
- <sect1 id="faq-features">
- <title>Features</title>
-
- <qandaset>
-
- <qandaentry>
- <question>
- <para>
- How can I use Evolution with Microsoft Exchange or Lotus Notes?
- </para>
- </question>
- <answer>
- <para>
- If your server uses standard open protocols like IMAP,
- LDAP, POP, and SMTP, you can use Evolution with it. You
- can share addresses with vCards and calendar items with
- iCal appointments.
- </para>
- </answer>
- </qandaentry>
-
- <qandaentry>
- <question>
- <para>
- Can I use Evolution with KDE?
- </para>
- </question>
- <answer>
- <para>
- Evolution will work fine in KDE. You will need to
- install all of the GNOME libraries that it depends on.
- Also, certain configuration options, such as default
- fonts and the message editor keybinding behavior, must be
- changed using the GNOME Control Center application (this
- will also run from within KDE).
- </para>
- </answer>
- </qandaentry>
-
- <qandaentry>
- <question>
- <para>
- How can I remove or rename a folder?
- </para>
- </question>
- <answer>
- <para>
- Right-click on the folder and select the
- <guimenuitem>Delete</guimenuitem> or
- <guimenuitem>Rename</guimenuitem> items.
- </para>
- </answer>
- </qandaentry>
-
- <qandaentry>
- <question>
- <para>
- Why doesn't drag and drop between folders seem to work?
- </para>
- </question>
- <answer>
- <para>
- The implementation isn't finished, although it's nearly done.
- </para>
-
- <para>
- In the meantime, right-click on the folders or messages
- you want to move, and select the
- <guimenuitem>Move</guimenuitem> or
- <guimenuitem>Copy</guimenuitem> options.
- </para>
- </answer>
- </qandaentry>
-
- <qandaentry>
- <question>
- <para>
- Can I read mail from a mailbox file created by some other
- application (e.g. Mutt) without importing mail from it?
- </para>
- </question>
- <answer>
- <para>
- No, but it's a planned feature.
- </para>
- </answer>
- </qandaentry>
-
- <qandaentry>
- <question>
- <para>
- Can Evolution sync with my Palm OS (tm) device?
- </para>
- </question>
- <answer>
- <para>
- Yes. However, it is not yet stable enough for general
- release and we do not yet ship Evolution with Palm
- synchronization enabled default. Until we do, you will
- need to compile this in yourself. Check the
- <filename>README</filename> file for additional
- information on the requirements. Full compatibility and
- synchronization for calendar and addressbook applications
- on Palm devices will be implemented and shipped soon.
- </para>
- </answer>
- </qandaentry>
- <qandaentry>
- <question>
- <para>
- What is the difference between a virtual folder (vfolder)
- and a regular folder?
- </para>
- </question>
- <answer>
- <para>
- A virtual folder is like a saved search: it is a view of
- your mail. Regular folders actually contain the mail
- messages. You can have one message be in multiple virtual
- folders, but only in one regular folder. See the section
- in the Evolution manual about virtual folders for more
- information.
- </para>
- </answer>
- </qandaentry>
- <qandaentry>
- <question>
- <para>
- Can Evolution spell-check messages while I compose them?
- </para>
- </question>
- <answer>
- <para>
- Yes. The Evolution composer is able to highlight
- mis-spelled word on the fly as you type them, and also
- give you suggestions for possible corrections. In order
- for this to work you need the
- <filename>gnome-spell</filename> component, which is not
- shipped with Ximian GNOME yet.
- </para>
-
- <para>
- If you are brave enough, you can check out module
- <filename>gnome-spell</filename> from the GNOME CVS and
- compile it yourself. Check out its README file for a list
- of <filename>gnome-spell</filename>'s requirements for
- compilation.
- </para>
-
- <para>
- Note that you don't need to recompile Evolution after
- installing <filename>gnome-spell</filename>; it will be
- picked up automatically.
- </para>
- </answer>
- </qandaentry>
-
- <qandaentry>
- <question>
- <para>
- Why can't I see the images that are contained in some HTML
- mail messages.
- </para>
- </question>
- <answer>
- <para>
- Evolution currently doesn't support this, but it's a
- planned feature. It will be an option: many people like
- to turn off the images because they use up bandwidth and can
- be used to spy on your email reading habits.
- </para>
- </answer>
- </qandaentry>
-
- <qandaentry>
- <question>
- <para>
- Can I change the font that Evolution uses to compose and
- display mail messages?
- </para>
- </question>
- <answer>
- <para>
- You have to change the GtkHTML settings for that: in the
- GNOME Control Center, go to the "HTML Viewer"
- configuration page, which is under the "Document Handlers"
- category.
- </para>
- </answer>
- </qandaentry>
- <qandaentry>
- <question>
- <para>
- How do I import my Outlook <filename>.pst</filename> files into Evolution?
- </para>
- </question>
- <answer>
- <para>
- You cannot import these files directly into Evolution
- because the <filename>.pst</filename> format is a
- proprietary format. However, Mozilla Mail on Windows can
- convert them into the <type>mbox</type> format, which can
- then be imported by Evolution.
- </para>
-
- <para>
- To start importing your Outlook mail to Evolution, run
- Mozilla Mail on Windows and select the
- <menuchoice><guimenu>File</guimenu><guimenuitem>Import...</guimenuitem></menuchoice>
- to begin. Then select that you wish to import Mail from
- Outlook. Once Mozilla has imported all your mail, reboot
- your computer into Linux.
- </para>
-
- <para>
- Mount your Windows partition in Linux and run Evolution to
- begin importing your mail. Select
- <menuchoice><guimenu>File</guimenu><guimenuitem>Import
- File...</guimenuitem></menuchoice> to start importing. Set
- the file type to MBox (mbox) and click on
- <guibutton>Browse</guibutton> to select the mail you want
- to import.
- </para>
-
- <para>
- If you are the only user on Windows, the mail files will
- be stored in <filename>/mnt/c/windows/Application
- Data/Mozilla/Profiles/default/XXXX/Mail/imported.mail/</filename>
- where <filename>/mnt/c/</filename> is your windows
- partition mount point and XXXX is some collection of
- numbers and digits ending in <filename>.slt</filename>.
- </para>
-
- <para>
- If there is more than one user, the file will be in
- <filename>/mnt/c/windows/Profiles/USERNAME/XXXX/Mail/imported.mail/</filename>
- where USERNAME is your Windows username.
- </para>
-
- <para>
- For each mail folder in Outlook, Mozilla will convert the
- folder into one mbox file. To import all your mail, import
- all the files without a <filename>.msf</filename>
- extension.
- </para>
- </answer>
- </qandaentry>
-
- <qandaentry>
- <question>
- <para>
- If Mozilla can import <filename>.pst</filename> files, why can't Evolution?
- </para>
- </question>
- <answer>
- <para>
- Mozilla on Windows accesses the <filename>.pst</filename>
- files through the <filename>MAPI.DLL</filename>, which is
- only available on Windows. <filename>MAPI.DLL</filename>
- is the only way to access <filename>.pst</filename> files
- and Evolution cannot use this DLL in Linux.
- </para>
- </answer>
- </qandaentry>
- <qandaentry>
- <question>
- <para>
- Will there be an Evolution server? How about a text-based or web-based front end?
- </para>
- </question>
- <answer>
- <para>
- Of course, we can't comment on unannounced future product
- plans, but Evolution's architecture would permit the
- existence of that kind of software. If there is enough
- demand for such software we will consider moving in that
- direction.
- </para>
- </answer>
- </qandaentry>
-
- <qandaentry>
- <question>
- <para>
- Will Evolution make a good mocha?
- </para>
- </question>
- <answer>
- <para>
- Only espresso is planned, but you can easily plug in a chocolate component.
- </para>
- </answer>
- </qandaentry>
-
- </qandaset>
- </sect1>
-
-
- <!-- Section: Getting and compiling -->
-
- <sect1 id="faq-get-and-compile">
- <title>
- Getting and Compiling Evolution
- </title>
- <qandaset>
- <qandaentry>
- <question>
- <para>
- Where can I get the latest Evolution release?
- </para>
- </question>
- <answer>
- <para>
- There are two ways to install the latest Evolution
- release:
- <itemizedlist>
- <listitem>
- <para>
- If you have Ximian GNOME installed, you can start
- Red Carpet, Ximian's software updating system, and
- subscribe to the Evolution channel. This will let
- you install a binary for the latest release, and
- will also warn you when a new version has been made
- available.
- </para>
- </listitem>
-
- <listitem>
- <para>
- If you want to compile from source, you can
- download the latest official Evolution tarball
- from:
- </para>
-
- <para>
- <ulink url="ftp://ftp.gnome.org/pub/GNOME/unstable/sources/evolution">
- ftp://ftp.gnome.org/pub/GNOME/unstable/sources/evolution</ulink>
- </para>
- </listitem>
- </itemizedlist>
- </para>
- </answer>
- </qandaentry>
- <qandaentry>
- <question>
- <para>
- Are binary snapshots available?
- </para>
- </question>
- <answer>
- <para>
- Yes, if you have Ximian GNOME installed. Just run Red
- Carpet and subscribe to the Evolution Snapshot channel.
- </para>
-
- <para>
- You can check the status of snapshots at
- <ulink url="http://primates.ximian.com/~snapshot">http://primates.ximian.com/~snapshot</ulink>.
- </para>
- </answer>
- </qandaentry>
- <qandaentry>
- <question>
- <para>
- Why isn't a new snapshot available today?
- </para>
- </question>
- <answer>
- <para>
- Sometimes the build might fail because of problems with
- the source on CVS. In this case, just wait for next day's
- snapshot.
- </para>
- </answer>
- </qandaentry>
- <qandaentry>
- <question>
- <para>
- How do I get Evolution from CVS?
- </para>
- </question>
- <answer>
- <para>
- If you already have
- <ulink url="http://cvs.gnome.org">GNOME CVS</ulink> access,
- simply check out the following modules: evolution,
- gtkhtml, gal.
- </para>
- <para>
- If you don't have a CVS account, you can use anoncvs
- instead. Bear in mind that anoncvs is only synchronized once
- a day, and code received from anoncvs may not be latest
- version available.
- </para>
-
- <para>
- Before using the anoncvs server, you have to log into it.
- This only needs to be done once. Use this command:
- </para>
-
- <programlisting>
- cvs -z3 -d :pserver:anonymous@anoncvs.gnome.org:/cvs/gnome login
- </programlisting>
-
- <para>
- Then you can retrieve the modules needed to compile Evolution
- using the following command:
- </para>
-
- <programlisting>
- cvs -z3 -d :pserver:anonymous@anoncvs.gnome.org:/cvs/gnome co evolution gtkhtml gal
- </programlisting>
- </answer>
- </qandaentry>
-
- <qandaentry>
- <question>
- <para>
- How should I compile Evolution avoiding conflicts with my
- existing GNOME installation?
- </para>
- </question>
- <answer>
- <para>
- The best way is to install Evolution into a separate prefix.
- In order to specify a non-default installation prefix, you
- can pass the <parameter>--prefix</parameter> option to
- <filename>configure</filename> or
- <filename>autogen.sh</filename>. For example:
- </para>
-
- <programlisting>
- cd /cvs/evolution
- ./autogen.sh --prefix=/opt/gnome
- </programlisting>
-
- <para>
- If you install Evolution and the Evolution libraries in a
- non-standard prefix, make sure you set the appropriate
- environment variables in the startup script for Evolution:
- </para>
-
- <programlisting>
- export PATH=/opt/gnome:$PATH
- export GNOME_PATH=/opt/gnome:/usr
- </programlisting>
-
- <para>
- You may also need to add <filename>$prefix/lib</filename>
- (e.g. <filename>/opt/gnome/lib</filename>) to your
- <filename>/etc/ld.so.conf</filename>. Of course, this will
- not work for systems which do not use ld.so.conf, such as
- HP-UX.
- </para>
- </answer>
- </qandaentry>
- <qandaentry>
- <question>
- <para>
- I get the error message: <computeroutput>make: *** No rule
- to make target
- `all-no-@BUILD_INCLUDED_LIBINTL@'</computeroutput>
- </para>
- </question>
- <answer>
- <para>
- You probably have <filename>gettext</filename> 0.10.36 or
- later installed. Try downgrading to 0.10.35;
- unfortunately, 0.10.36 introduced some incompatibilities
- with the current <filename>xml-i18n-tools</filename>.
- </para>
- </answer>
- </qandaentry>
- </qandaset>
- </sect1>
-
- <sect1 id="faq-trouble">
- <title>Troubleshooting</title>
- <qandaset>
- <qandaentry>
- <question>
- <para>
- I get <computeroutput>Cannot initialize the Evolution
- shell</computeroutput>.
- </para>
- </question>
- <answer>
- <para>
- There are a number of things that can cause this error.
- Check that:
- </para>
-
- <itemizedlist>
- <listitem>
- <para>
- <filename>oafd</filename> is listed in your <envar>PATH</envar>
- environment variable.
- </para>
- </listitem>
-
- <listitem>
- <para>
- <filename>GNOME_Evolution_Shell.oaf</filename> and
- the other      
- <filename>GNOME_Evolution_*.oaf</filename> files are
- readable and installed in
- <filename>$prefix/share/oaf</filename>, where
- <filename>$prefix</filename> is one of the prefixes
- listed in <envar>GNOME_PATH</envar> or
- <envar>OAF_INFO_PATH</envar>.  (These variables are
- supposed to contain $PATH-like colon-separated lists of
- paths.  If the installation prefix for Evolution is
- different from that). Run `oaf-slay' once before running
- `evolution' again if you change $GNOME_PATH or
- $OAF_INFO_PATH.
- </para>
- </listitem>
-
- <listitem>
- <para>
- <filename>evolution</filename>,
- <filename>evolution-mail</filename> and the other
- <filename>evolution-*</filename> executables are in your
- $PATH.
- </para>
- </listitem>
- </itemizedlist>
- </answer>
- </qandaentry>
-
- <qandaentry>
- <question>
- <para>
- I get <computeroutput>Cannot open composer window</computeroutput>.
- </para>
- </question>
- <answer>
- <para>
- This actually means that Evolution cannot activate the HTML
- editor component from GtkHTML. The comments in the previous
- answer still apply; also make sure that
- <command>gnome-gtkhtml-editor</command> is in your
- <envar>PATH</envar>.
- </para>
- </answer>
- </qandaentry>
-
- <qandaentry>
- <question>
- <para>
- I updated Evolution and now my addressbook information is gone!
- What should I do?
- </para>
- </question>
- <answer>
- <para>
- Evolution uses the <filename>libdb</filename> library to
- handle the addressbook database. Two versions of
- <filename>libdb</filename> can be used with Evolution: version
- 1.88 and version 2.
- </para>
-
- <para>
- Unfortunately, an Evolution executable that is linked against
- a certain version of <filename>libdb</filename> will only be
- able to read addressbook files written by another Evolution
- executable that is linked with the same version of the
- library. If your addressbook is not readable by Evolution
- anymore, it probably means that you used to have Evolution
- linked with a certain version of <filename>libdb</filename>,
- but now it gets linked to a different version.
- </para>
-
- <para>
- Because of the way <filename>libdb</filename> is designed, it
- is not easy for Evolution to automatically do the conversion
- between the two formats. But, if your Evolution used to be
- linked against version 1.85 and now is linked to version 2,
- there is a very simple way to convert the database and recover
- your data.
- </para>
-
- <itemizedlist>
-
- <listitem>
- <para>
- First of all, check the format of the database using the
- <command>file</command> command:
- </para>
-
- <programlisting>
- file ~/evolution/local/Contacts/addressbook.db
- </programlisting>
-
- <para>
- You want version 1.85 there. If your version is 2, then
- your current Evolution is probably linked against
- version 1.85 and you cannot convert the database to the
- old format. To do that, follow these instructions:
- </para>
- </listitem>
-
- <listitem>
- <para>
- Quit Evolution.
- </para>
- </listitem>
-
- <listitem>
- <para>
- Make a copy of the addressbook database for backup
- purposes, then move the original out of the way.
- </para>
-
- <programlisting>
- cd ~/evolution/local/Contacts
- cp addressbook.db addressbook.db.backup
- mv addressbook.db addressbook.db.tmp
- </programlisting>
- </listitem>
-
- <listitem>
- <para>
- Convert the contacts to the new format using
- <command>db_dump185</command> and
- <command>db_load</command>:
- </para>
-
- <programlisting>
- db_dump185 addressbook.db.tmp | db_load ~/evolution/local/Contacts/addressbook.db
- </programlisting>
- </listitem>
-
- <listitem>
- <para>
- Restart Evolution.
- </para>
- </listitem>
-
- </itemizedlist>
- </answer>
- </qandaentry>
-
- <qandaentry>
- <question>
- <para>
- Evolution reported an error when trying to retrieve from my
- local spool in <filename>/var/spool/mail/username</filename>. Why?
- </para>
- </question>
- <answer>
- <para>
- Evolution doesn't have an external helper for moving mail,
- so <filename>/var/spool/mail/</filename> must be writable
- by you. Try this:
- </para>
-
- <programlisting>
- chmod 1777 /var/spool/mail
- </programlisting>
-
- <para>
- We're working on a solution to this problem now.
- </para>
- </answer>
- </qandaentry>
-
- <qandaentry>
- <question>
- <para>
- Evolution crashes reporting that it couldn't allocate N
- billion bytes; how do I fix this?
- </para>
- </question>
- <answer>
- <para>
- This usually happens when a component tries talking a
- certain version of a CORBA interface to another component
- that supports a different version. For example, this can
- happen when you recompile and install a single component
- without recompiling/installing the rest of Evolution.
- </para>
-
- <para>
- If you run into this problem, make sure all the components
- are compiled and installed at the same time. This also
- applies to GtkHTML upgrades; after upgrading and
- installing a newer GtkHTML, always re-compile and
- re-install Evolution against it.
- </para>
- </answer>
- </qandaentry>
-
- <qandaentry>
- <question>
- <para>
- What is <command>killev</command> and why do I need to use it?
- </para>
- </question>
- <answer>
- <para>
- Evolution is actually made up of several components that run
- as separate processes. Evolution's shell is not very good
- at cleaning up stale processes, so it is possible that
- sometimes already-running components cause unexpected and/or
- broken behavior.
- </para>
-
- <para>
- It's always a good idea to run <command>killev</command>
- after a crash in Evolution, especially if the Evolution
- shell itself crashed. (If a component crashes instead, you
- should try to exit the shell cleanly first, so you give a
- chance to the other components to clean things up properly.)
- </para>
- </answer>
- </qandaentry>
-
- <qandaentry>
- <question>
- <para>
- What is <command>oaf-slay</command> and why do I need to use it?
- </para>
- </question>
- <answer>
- <para>
- <command>oaf-slay</command> is an utility which comes with
- OAF, the Object Activation Framework that is used in the
- GNOME Desktop to activate components. It will kill the
- object activation daemon (<command>oafd</command>) as well
- as all the active components on the system.
- </para>
-
- <para>
- Using <command>oaf-slay</command>
- <command>oaf-slay</command> is quite drastic and can cause
- problems with other programs that use oaf, especially with
- <application>Nautilus</application>. To avoid problems, do
- not run <command>oaf-slay</command> while you are in GNOME.
- </para>
- </answer>
- </qandaentry>
- </qandaset>
- </sect1>
-
- <sect1 id="faq-debugging">
- <title>Questions about Bugs and Debugging</title>
- <para>
- Find a bug? Here's how to help us fix it!
- </para>
-
- <qandaset>
- <qandaentry>
- <question>
- <para>
- Where should I report bugs for Evolution?
- </para>
- </question>
- <answer>
- <para>
- You can use the GNOME Bug Report Tool
- (<command>bug-buddy</command>), or report bugs to the
- Ximian bug reporting system (Bugzilla), located at <ulink
- url="http://bugzilla.ximian.com">http://bugzilla.ximian.com</ulink>.
- </para>
-
- <para>
- Please use the query function to check if a bug has been
- submitted already, so that we avoid duplicate reports.
- </para>
- </answer>
- </qandaentry>
-
-
- <qandaentry>
- <question>
- <para>
- What is a stack trace (backtrace) and how do I get one?
- </para>
- </question>
- <answer>
- <para>
- A stack trace is a list of the chain of function calls
- that lead to some point in the program. Typically, you
- want to get a stack trace when Evolution crashes or
- hangs and you want to try to figure out where in the
- code that happened and why. For this reason, stack
- traces are extremely useful for the Evolution
- developers, so it's important that you learn how to get
- them, and include them in crash reports. The
- <application>bug-buddy</application> tool can get and
- submit a stack trace for you. If you want to do it by
- yourself, here's how:
- </para>
- <para>
- First of all, in order to get a stack trace, your
- executable (and possibly the libraries) must be compiled
- with debugging symbols. Debugging symbols are created by
- default if you compile from CVS, and are included in the
- snapshot builds. If you decide to compile by yourself
- with some custom CFLAGS value, make sure -g is included
- in them.
- </para>
- <para>
- Finally, you must put the component that crashes through
- <application>gdb</application>, the GNU debugging tool.
- To do so, make sure all the components are dead (exit
- Evolution and run <command>killev</command>), then run the
- following command:
- <programlisting>
- <command>gdb name-of-component</command>
- </programlisting>
-
- Where "name-of-component" is the name of the component that
- crashed.
- </para>
- <para>
- Then, at the gdb prompt, type r (for "run") and wait a
- few seconds to make sure the component has registered
- with the name service. Then start
- <application>Evolution</application> normally from a
- different terminal.
- </para>
- <para>
- When you have started
- <application>Evolution</application>, reproduce the
- crash, and go back to the terminal where you ran gdb. If
- the component crashed, you should have a prompt there;
- otherwise, just hit Control+C. At the prompt, type
- <command>info threads</command>. This will give you a
- screen that looks like this:
- </para>
- <para>
- <programlisting>
-(gdb) info threads
- 8 Thread 6151 (LWP 14908) 0x409778fe in sigsuspend () from /lib/libc.so.6
- 7 Thread 5126 (LWP 14907) 0x409778fe in sigsuspend () from /lib/libc.so.6
- 6 Thread 4101 (LWP 1007) 0x409778fe in sigsuspend () from /lib/libc.so.6
- 5 Thread 3076 (LWP 1006) 0x409778fe in sigsuspend () from /lib/libc.so.6
- 4 Thread 2051 (LWP 1005) 0x409778fe in sigsuspend () from /lib/libc.so.6
- 3 Thread 1026 (LWP 1004) 0x409778fe in sigsuspend () from /lib/libc.so.6
- 2 Thread 2049 (LWP 1003) 0x40a10d90 in poll () from /lib/libc.so.6
- 1 Thread 1024 (LWP 995) 0x40a10d90 in poll () from /lib/libc.so.6
- </programlisting>
-
- For the most part, only
- <application>evolution-mail</application> will have more
- than one thread.
- </para>
- <para>
- Now, for each of the threads listed, type the following commands:
-<programlisting>
-thread N
-bt
-</programlisting>
- Where 'N' is the number of the thread (in this example, 1
- through 8).
- </para>
- <para>
- Cut and paste all the output gdb gives you into a text
- file. You can quit gdb by typing
- <userinput>quit</userinput>
- </para>
- <para>
- If you prefer, you can start gdb while a process is
- running. You'll want to do this right after a crash dialog
- appears, but before hitting "OK" or "Submit bug report".
- Start <application>gdb</application> as above, but instead
- of using <userinput>r</userinput>, type <userinput>attach
- PID</userinput> where PID is the process ID of the
- component you want to debug.
- </para>
- <para>
- If that sounds too complicated, you can always use
- <command>bug-buddy</command> to get and submit the stack
- trace.
- </para>
- </answer>
- </qandaentry>
- <qandaentry>
- <question>
- <para>
- A component of evolution crashed, but since the rest of
- evolution stayed up, I couldn't use bug-buddy to get a
- stack trace. How can I use gdb to get a stack trace of
- the component?
- </para>
- </question>
- <answer>
- <para>
- To trace a failing component (in this example, evolution-mail):
- <orderedlist numeration="arabic">
- <listitem>
- <para>
- Open two terminals.
- </para>
- </listitem>
- <listitem>
- <para>
- In one, type <command>gdb evolution-mail</command>
- . Replace "evolution-mail" with the name of the
- component that is crashing: evolution-addressbook,
- evolution-calendar, etc.)
- </para>
- </listitem>
- <listitem>
- <para>
- Once gdb starts, type <userinput>r</userinput> and
- hit enter. Give it a few seconds, to make sure it
- starts up completely.
- </para>
- </listitem>
- <listitem>
- <para>
- In the second terminal, type
- <command>evolution</command>. Do whatever you did
- to cause the crash in the component you used in
- step two.
- </para>
- </listitem>
- <listitem>
- <para>
- When the crash occurs, type 'bt' in the first
- terminal.
- </para>
- </listitem>
-
- <listitem>
- <para>
- Cut and paste the output into your bug report.
- </para>
- </listitem>
- </orderedlist>
- </para>
- </answer>
- </qandaentry>
- </qandaset>
- </sect1>
- </appendix>
-
-<!-- Local Variables: --> <!-- indent-tabs-mode:nil --> <!-- End: -->
-
-
-
-