diff options
Diffstat (limited to 'calendar/gui/calendar-pilot-sync.c')
| -rw-r--r-- | calendar/gui/calendar-pilot-sync.c | 815 |
1 files changed, 0 insertions, 815 deletions
diff --git a/calendar/gui/calendar-pilot-sync.c b/calendar/gui/calendar-pilot-sync.c deleted file mode 100644 index d9f44c14cb..0000000000 --- a/calendar/gui/calendar-pilot-sync.c +++ /dev/null @@ -1,815 +0,0 @@ -/* -*- Mode: C; tab-width: 8; indent-tabs-mode: t; c-basic-offset: 8 -*- */ -/* - * calendar-pilot-sync.c: - * - * (C) 1999 International GNOME Support - * - * Author: - * Miguel de Icaza (miguel@gnome-support.com) - * - */ - - -/* - * - * this only works in a monogamous pilot/desktop situation. - * - */ - - - -#include <config.h> -#include <gnome.h> -#include <stdio.h> -#include <stdlib.h> -#include <string.h> -#include <bonobo.h> -#include <bonobo/bonobo-control.h> - -#ifdef USING_OAF -#include <liboaf/liboaf.h> -#else -#include <libgnorba/gnorba.h> -#endif - -#include <cal-client/cal-client.h> -#include "cal-util/calobj.h" -#include "cal-util/timeutil.h" -#include "pi-source.h" -#include "pi-socket.h" -#include "pi-datebook.h" -#include "pi-dlp.h" - - -char *calendar_file; - -/* The default port to communicate with */ -char *pilot_port = "/dev/pilot"; - -/* Our pi-socket address where we connect to */ -struct pi_sockaddr addr; - -/* The Pilot DB identifier for DateBook */ -int db; - -/* If true, enable debug output for alarms */ -int debug_alarms = 0; - -/* True if you want to dump the flags bits from the records */ -int debug_attrs = 0; - -int only_desktop_to_pilot = 0; - -int only_pilot_to_desktop = 0; - - -const struct poptOption calendar_sync_options [] = { - { "pilot", 0, POPT_ARG_STRING, &pilot_port, 0, - N_("Specifies the port on which the Pilot is"), N_("PORT") }, - { "debug-attrs", 0, POPT_ARG_NONE, &debug_attrs, 0, - N_("If you want to debug the attributes on records"), NULL }, - { "only-desktop", 0, POPT_ARG_NONE, &only_desktop_to_pilot, 0, - N_("Only syncs from desktop to pilot"), NULL }, - { "only-pilot", 0, POPT_ARG_INT, &only_pilot_to_desktop, 0, - N_("Only syncs from pilot to desktop"), NULL }, - { NULL, '\0', 0, NULL, 0 } -}; - -static void -conduit_free_Appointment (struct Appointment *a) -{ - /* free_Appointment is brain-dead with respect to guarding against - double-frees */ - - free_Appointment (a); - a->exception = 0; - a->description = 0; - a->note = 0; -} - -static int -setup_connection (void) -{ - int socket; - int ret, news; - - if (!(socket = pi_socket(PI_AF_SLP, PI_SOCK_STREAM, PI_PF_PADP))) - g_error (_("Can not create Pilot socket\n")); - - addr.pi_family = PI_AF_SLP; - strncpy ((void *)&addr.pi_device, pilot_port, sizeof (addr.pi_device)); - - ret = pi_bind (socket, (struct sockaddr *)&addr, sizeof (addr)); - if (ret == -1) - g_error (_("Can not bind to device %s\n"), pilot_port); - - if (pi_listen (socket, 1) == -1) - g_error (_("Failed to get a connection " - "from the Pilot device")); - - if ((news = pi_accept (socket, 0, 0)) == -1) - g_error (_("pi_accept failed")); - - return news; -} - - -static void -init_bonobo (int *argc, char **argv) -{ -# ifdef USING_OAF - /* FIXME: VERSION instead of "0.0". */ - gnome_init_with_popt_table ("evolution-calendar", "0.0", - *argc, argv, oaf_popt_options, - 0, NULL); - oaf_init (*argc, argv); -# else - CORBA_Environment ev; - - CORBA_exception_init (&ev); - gnome_CORBA_init_with_popt_table ( - "evolution-calendar", "0.0", - argc, argv, NULL, 0, NULL, GNORBA_INIT_SERVER_FUNC, &ev); - CORBA_exception_free (&ev); -# endif - - if (bonobo_init (CORBA_OBJECT_NIL, - CORBA_OBJECT_NIL, CORBA_OBJECT_NIL) == FALSE) - g_error (_("Could not initialize Bonobo")); -} - - -static void -delete_record_from_desktop (CalClient *client, int id) -{ - char *uid; - CalClientGetStatus status; - - status = cal_client_get_uid_by_pilot_id (client, id, &uid); - - if (status == CAL_CLIENT_GET_SUCCESS) { - cal_client_remove_object (client, uid); - g_free (uid); - } -} - - - -static void -dump_attr (int flags) -{ - if (flags & dlpRecAttrDeleted) - printf (" Deleted"); - if (flags & dlpRecAttrDirty) - printf (" Dirty"); - if (flags & dlpRecAttrBusy) - printf (" Busy"); - if (flags & dlpRecAttrSecret) - printf (" Secret"); - if (flags & dlpRecAttrArchived) - printf (" Archive"); - printf ("\n"); -} - - - -/* take a record retrieved from a pilot and merge it into the desktop cal */ - -static void -update_record (CalClient *client, int id, struct Appointment *a, int attr) -{ - iCalObject *obj; - int i; - CalClientGetStatus status; - char *uid = NULL; - gboolean success; - - printf ("pilot->cal: %d, ", id); - - status = cal_client_get_uid_by_pilot_id (client, id, &uid); - if (status == CAL_CLIENT_GET_SUCCESS) - status = cal_client_get_object (client, uid, &obj); - - if (status != CAL_CLIENT_GET_SUCCESS) { - /* Object did not exist, creating a new one */ - time_t now = time (NULL); - - obj = ical_new (a->note ? a->note : "", - g_get_user_name (), - a->description ? a->description : ""); - - obj->created = now; - obj->last_mod = now; - obj->priority = 0; - obj->transp = 0; - obj->related = NULL; - obj->pilot_id = id; - obj->pilot_status = ICAL_PILOT_SYNC_NONE; - } - - if (obj->pilot_status == ICAL_PILOT_SYNC_MOD) { - printf (_("\tObject has been modified on desktop and on " - "the pilot, desktop takes precedence\n")); - ical_object_unref (obj); - return; - } - - /* - * Begin and end - */ - - if (a->event) - { - /* turn day-long events into a full day's appointment */ - a->begin.tm_sec = 0; - a->begin.tm_min = 0; - a->begin.tm_hour = 6; - - a->end.tm_sec = 0; - a->end.tm_min = 0; - a->end.tm_hour = 10; - } - - if (a->note) - obj->comment = g_strdup (a->note); - - if (a->description) - obj->summary = g_strdup (a->description); - - - obj->dtstart = mktime (&a->begin); - obj->dtend = mktime (&a->end); - - /* Special case: daily repetitions are converted to a multiday event */ - if (a->repeatType == repeatDaily){ - time_t newt = time_add_day (obj->dtend, a->repeatFrequency); - - obj->dtend = newt; - } - - /* - * Alarm - */ - if (a->alarm){ - obj->aalarm.type = ALARM_AUDIO; - obj->aalarm.enabled = 1; - obj->aalarm.count = a->advance; - - switch (a->advanceUnits){ - case advMinutes: - obj->aalarm.units = ALARM_MINUTES; - break; - - case advHours: - obj->aalarm.units = ALARM_HOURS; - break; - - case advDays: - obj->aalarm.units = ALARM_DAYS; - break; - default: - } - } - - /* - * Recurrence - */ - if (a->repeatFrequency && a->repeatType != repeatDaily){ - obj->recur = g_new0 (Recurrence, 1); - - switch (a->repeatType){ - case repeatDaily: - /* - * In the Pilot daily repetitions are actually - * multi-day events - */ - g_warning ("Should not have got here"); - break; - - case repeatMonthlyByDate: - obj->recur->type = RECUR_MONTHLY_BY_DAY; - obj->recur->u.month_day = a->repeatFrequency; - break; - - case repeatWeekly: - { - int wd; - - obj->recur->type = RECUR_WEEKLY; - for (wd = 0; wd < 7; wd++) - if (a->repeatDays [wd]) - obj->recur->weekday |= 1 << wd; - - if (obj->recur->weekday == 0){ - struct tm tm = *localtime (&obj->dtstart); - - obj->recur->weekday = 1 << tm.tm_wday; - } - break; - } - - case repeatMonthlyByDay: - obj->recur->type = RECUR_MONTHLY_BY_POS; - obj->recur->u.month_pos = a->repeatFrequency; - obj->recur->weekday = (a->repeatDay / 7); - break; - - case repeatYearly: - obj->recur->type = RECUR_YEARLY_BY_DAY; - break; - - default: - g_warning ("Unhandled repeate case"); - } - - if (a->repeatForever) - obj->recur->duration = 0; - else - obj->recur->_enddate = mktime (&a->repeatEnd); - } - - /* - * Load exception dates - */ - obj->exdate = NULL; - for (i = 0; i < a->exceptions; i++){ - time_t *t = g_new (time_t, 1); - - *t = mktime (&(a->exception [i])); - obj->exdate = g_list_prepend (obj->exdate, t); - } - - g_free (obj->class); - - if (attr & dlpRecAttrSecret) - obj->class = g_strdup ("PRIVATE"); - else - obj->class = g_strdup ("PUBLIC"); - - /* - * Now, convert the in memory iCalObject to a full vCalendar - * we can send - */ - success = cal_client_update_object (client, obj); - /* set the pilot_status to sync_none so we don't send - this event right back to the pilot */ - cal_client_update_pilot_id (client, obj->uid, obj->pilot_id, - ICAL_PILOT_SYNC_NONE); - - - dump_attr (attr); - printf (" but not used.\n"); - - /* - * Shutdown - */ - ical_object_unref (obj); -} - -/* - * Sets the alarm for Appointment based on @alarm - */ -static int -try_alarm (CalendarAlarm *alarm, struct Appointment *a) -{ - if (!alarm->enabled) - return 0; - - a->advance = alarm->count; - switch (alarm->type){ - case ALARM_DAYS: - a->advanceUnits = advDays; - break; - - case ALARM_HOURS: - a->advanceUnits = advHours; - break; - - case ALARM_MINUTES: - a->advanceUnits = advMinutes; - break; - - default: - return 0; - } - a->alarm = 1; - return 1; -} - - -static void -sync_object_to_pilot (CalClient *client, iCalObject *obj, int pilot_fd) -{ - char buffer [65536]; - struct Appointment *a; - int wd, i, idx, attr, cat, rec_len; - recordid_t new_id; - GList *l; - - a = g_new0 (struct Appointment, 1); - - attr = 0; - cat = 0; - idx = 0; - - printf ("cal->pilot: pilotid=%d, ", obj->pilot_id); - - if (obj->pilot_id) { - rec_len = dlp_ReadRecordById (pilot_fd, db, obj->pilot_id, - buffer, - &idx, &rec_len, &attr, &cat); - - if (rec_len > 0) - unpack_Appointment (a, buffer, rec_len); - } else { - attr = 0; - cat = 0; - } - - /* a contains the appointment either cleared or with - the data from the Pilot */ - a->begin = *localtime (&obj->dtstart); - a->end = *localtime (&obj->dtend); - - /* FIXME: add support for timeless */ - a->event = 0; - - /* Alarms, try the various ones. Probably we should only do Audio? - * Otherwise going gnomecal->pilot->gnomecal would get the gnomecal - * with *possibly* an alarm that was not originally defined. - */ - a->alarm = 0; - if (try_alarm (&obj->aalarm, a) == 0) - if (try_alarm (&obj->dalarm, a) == 0) - try_alarm (&obj->palarm, a); - - /* Recurrence */ - if (obj->recur){ - a->repeatFrequency = obj->recur->interval; - - switch (obj->recur->type){ - case RECUR_MONTHLY_BY_POS: - a->repeatType = repeatMonthlyByDay; - a->repeatFrequency = obj->recur->u.month_pos; - a->repeatDay = obj->recur->weekday * 7; - break; - - case RECUR_MONTHLY_BY_DAY: - a->repeatType = repeatMonthlyByDate; - a->repeatFrequency = obj->recur->u.month_day; - break; - - case RECUR_YEARLY_BY_DAY: - a->repeatType = repeatYearly; - break; - - case RECUR_WEEKLY: - for (wd = 0; wd < 7; wd++) - if (obj->recur->weekday & (1 << wd)) - a->repeatDays [wd] = 1; - a->repeatType = repeatWeekly; - break; - case RECUR_DAILY: - - default: - a->repeatType = repeatNone; - break; - } - if (obj->recur->enddate == 0){ - a->repeatForever = 1; - } else - a->repeatEnd = *localtime (&obj->recur->enddate); - } - - /* - * Pilot uses a repeat-daily for a multi-day event, adjust - * for that case - */ - if ((a->end.tm_mday != a->begin.tm_mday) || - (a->end.tm_mon != a->begin.tm_mon) || - (a->end.tm_year != a->begin.tm_year)) { - a->event = 1; - a->begin.tm_sec = 0; - a->begin.tm_min = 0; - a->begin.tm_hour = 0; - - a->end.tm_sec = 0; - a->end.tm_min = 0; - a->end.tm_hour = 0; - - a->repeatEnd = a->end; - a->repeatForever = 0; - a->repeatFrequency = 1; - a->repeatType = repeatDaily; - } - - /* - * Exceptions - */ - a->exceptions = g_list_length (obj->exdate); - a->exception = (struct tm *)malloc (sizeof(struct tm) * a->exceptions); - for (i = 0, l = obj->exdate; l; l = l->next, i++){ - time_t *exdate = l->data; - - a->exception [i] = *localtime (exdate); - } - - /* - * Description and note. - * - * We use strdup to be correct. free_Appointment assumes we used - * malloc. - */ - if (obj->comment) - a->note = strdup (obj->comment); - else - a->note = 0; - - if (obj->summary) - a->description = strdup (obj->summary); - else - a->description = strdup (_("No description")); - - if (strcmp (obj->class, "PUBLIC") != 0) - attr |= dlpRecAttrSecret; - else - attr &= ~dlpRecAttrSecret; - - /* - * Send the appointment to the pilot - */ - rec_len = pack_Appointment (a, buffer, sizeof (buffer)); - attr &= ~dlpRecAttrDirty; - - dump_attr (attr); - printf ("\n"); - - dlp_WriteRecord (pilot_fd, db, attr, - obj->pilot_id, 0, buffer, rec_len, &new_id); - - cal_client_update_pilot_id (client, obj->uid, new_id, - ICAL_PILOT_SYNC_NONE); - - - conduit_free_Appointment (a); - g_free (a); -} - -static void -sync_cal_to_pilot (CalClient *client, int pilot_fd) -{ - int c; - int i; - GList *uids; - GList *cur; - - - uids = cal_client_get_uids (client, CALOBJ_TYPE_ANY); - - c = g_list_length (uids); - - - for (cur=uids, i=0; cur; cur=cur->next, i++) { - const char *uid = cur->data; - CalClientGetStatus status; - iCalObject *ico; - - status = cal_client_get_object (client, uid, &ico); - if (status == CAL_CLIENT_GET_SUCCESS && - ico->pilot_status == ICAL_PILOT_SYNC_MOD) { - printf ("uid='%s', pilot_status=%d\n", uid, - ico->pilot_status); - sync_object_to_pilot (client, ico, pilot_fd); - } - /* - else { - warn - } - */ - } -} - - -static void -sync_pilot_to_cal (CalClient *client, int pilot_fd) -{ - int record; - unsigned char buffer [65536]; - - for (record = 0;; record++) { - struct Appointment a; - int rec_len, attr, size; - recordid_t id; - - rec_len = dlp_ReadRecordByIndex (pilot_fd, db, - record, buffer, - &id, &size, &attr, 0); - if (rec_len < 0) - break; - - unpack_Appointment (&a, buffer, rec_len); - - if (debug_attrs) - dump_attr (attr); - - /* If the object was deleted, remove it from - the desktop database */ - if (attr & dlpRecAttrDeleted) { - delete_record_from_desktop (client, id); - conduit_free_Appointment (&a); - dlp_DeleteRecord (pilot_fd, db, 0, id); - continue; - } - - if (attr & dlpRecAttrArchived) - continue; - - if (attr & dlpRecAttrDirty) { - update_record (client, id, &a, attr); - } else { - /* if the dirty flag is clear yet we have - no copy of it in the desktop database, then - we deleted it from the desktop database, so - delete it from the pilot */ - - char *uid; - CalClientGetStatus status; - status = cal_client_get_uid_by_pilot_id (client, - id, &uid); - if (status == CAL_CLIENT_GET_NOT_FOUND) { - printf ("deleting %ld from pilot\n", id); - dlp_DeleteRecord (pilot_fd, db, 0, id); - } - else - g_free (uid); - } - - attr &= ~dlpRecAttrDirty; - - conduit_free_Appointment (&a); - } -} - - -static void -sync_pilot (CalClient *client, int pilot_fd) -{ - struct PilotUser user_info; - struct SysInfo sys_info; - unsigned char buffer [300]; - - - /* Get the pilot's system information. FIX ME check return */ - dlp_ReadSysInfo (pilot_fd, &sys_info); - - /* Ask the pilot who it is. FIX ME check return */ - dlp_ReadUserInfo (pilot_fd, &user_info); - - - printf ("---------sys info--------------\n"); - printf ("romVersion=%ld\n", sys_info.romVersion); - printf ("locale=%ld\n", sys_info.locale); - strncpy (buffer, sys_info.name, sys_info.nameLength); - printf ("name='%s'\n", buffer); - printf ("---------user info--------------\n"); - printf ("userID=%ld\n", user_info.userID); - printf ("viewerID=%ld\n", user_info.viewerID); - printf ("lastSyncPC=%ld\n", user_info.lastSyncPC); - printf ("successfulSyncDate=%s", - ctime (& user_info.successfulSyncDate)); - printf ("lastSyncDate=%s", - ctime (& user_info.lastSyncDate)); - printf ("username='%s'\n", user_info.username); - strncpy (buffer, user_info.password, user_info.passwordLength); - printf ("password='%s'\n", buffer); - printf ("--------------------------------\n"); - - - /* This informs the user of the progress on the Pilot */ - dlp_OpenConduit (pilot_fd); - - if (dlp_OpenDB (pilot_fd, 0, 0x80 | 0x40, "DatebookDB", &db) < 0){ - g_warning (_("Could not open DatebookDB on the Pilot")); - dlp_AddSyncLogEntry (pilot_fd, _("Unable to open DatebookDB")); - pi_close (pilot_fd); - exit (1); - } - - /* - * 1. Pull all the records from the Pilot, and make any updates - * required on the desktop side - */ - if (! only_desktop_to_pilot) - sync_pilot_to_cal (client, pilot_fd); - - - /* - * 2. Push all changes on the desktop to the pilot. - * - */ - - if (! only_pilot_to_desktop) - sync_cal_to_pilot (client, pilot_fd); - - /* - * 3. Clear the dirty bits on all the pilot's events. - * - */ - - dlp_ResetSyncFlags (pilot_fd, db); - - /* - * 4. Close down. - * - */ - - dlp_CloseDB (pilot_fd, db); - dlp_AddSyncLogEntry (pilot_fd, - _("Synced DateBook from Pilot to GnomeCal")); - pi_close (pilot_fd); - - /* - * 5. Dump Core. - * - */ -} - - -static void -gnome_calendar_load_cb (GtkWidget *cal_client, - CalClientLoadStatus status, - int *link) -{ - CalClient *client = CAL_CLIENT (cal_client); - static int tried = 0; - - if (status == CAL_CLIENT_LOAD_SUCCESS) { - printf ("<Syncing>\n"); - sync_pilot (client, *link); - printf ("</Syncing>\n"); - } - else { - if (tried) { - printf ("load and create of calendar failed\n"); - return; - } - - cal_client_create_calendar (client, calendar_file); - tried = 1; - } - - gtk_main_quit (); -} - - -int -main (int argc, char *argv []) -{ - int link; - CalClient *client; - - init_bonobo (&argc, argv); - - g_log_set_always_fatal (G_LOG_LEVEL_ERROR | - G_LOG_LEVEL_CRITICAL | - G_LOG_LEVEL_WARNING); - - - /* FIX ME */ - calendar_file = g_concat_dir_and_file (g_get_home_dir (), - "evolution/local/Calendar/calendar.vcf"); - - - for (;;) { - printf ("Please, press HotSync button on the palm...\n"); - fflush (stdout); - link = setup_connection (); - printf ("Connected\n"); - - printf ("Contacting calendar server...\n"); - fflush (stdout); - client = cal_client_new (); - - gtk_signal_connect (GTK_OBJECT (client), "cal_loaded", - gnome_calendar_load_cb, &link); - - cal_client_load_calendar (client, calendar_file); - - bonobo_main (); - - gtk_object_unref (GTK_OBJECT (client)); - pi_close (link); - } - - return 0; -} - -/* Just a stub to link with */ - -void calendar_notify (time_t time, CalendarAlarm *which, void *data); - -void -calendar_notify (time_t time, CalendarAlarm *which, void *data) -{ -} - |